When using a wire stripping machine, if the wire cannot be peeled off, the cause should be identified first, and then adjustments should be made to solve the problem. The following methods can be used for handling:
1. Replace the blade
The blade of the wire stripping machine will become dull after a period of use, resulting in the problem of not being able to strip the wire. Therefore, replacing the blade is the preferred method to solve this problem. Generally speaking, the service life of blades is about 6 months. If the usage time exceeds 1 year, it is recommended to replace the blades.
2. Adjust the pressure of the wire stripping machine
The pressure of the wire stripping machine has a significant impact on the stripping effect. If the pressure is too low, it can lead to situations where the wire cannot be peeled off. Therefore, you can adjust the pressure of the wire stripping machine to increase it appropriately. Generally speaking, increasing the pressure by 10-20% is sufficient.
3. Check the wires
If you still encounter the situation of peeling without peeling, you need to check if there is a problem with the wire. It may be a mismatch between the wire and the wire stripping machine, or there may be a problem with the quality of the wire. In this case, it is recommended to replace the wire or contact the supplier to resolve the issue.
4. Adjust the position of the cutting blade
The position of the cutting blade can also affect the stripping effect. If the position of the cutting blade is incorrect, it may lead to the situation where the strip cannot be peeled off. Therefore, you can adjust the position of the cutting blade appropriately to make it closer to the stripping blade position, which can improve the stripping effect.
5. Cleaning wire stripping machine
If the wire stripping machine is not cleaned in a timely manner, dust and small debris may affect the wire stripping effect. Therefore, you should clean the wire stripping machine by using a brush to remove dust and small debris. Generally speaking, it is recommended to clean the wire stripping machine once a week.